Lynx LOH36 Bedienungsanleitung PDF herunterladen

Page 1 of 8 P/N 11857.00 Rev A

INSTALLATION INSTRUCTIONS

HOOD MODELS – LOH36, LOH48 & LOH60

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE INSTRUCTION BEFORE PROCEEDING.

INSTALLATIONS MUST COMPLY WITH ALL LOCAL CODES.

IMPORTANT: Save these Instructions for the Local Electrical Inspector's use.

INSTALLER: Please leave these Installation Instructions with this unit for owner.

OWNER: Please retain these Instructions for future reference

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, HOODS

SHOULD BE INSTALLED WITH VENTILATORS APPROVED FOR USE WITH THE HOOD. SEE TABLE – 1 ON

THIS PAGE FOR APPROVED VENTILATORS.

WARNING - TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

A. Installation work and Electrical Wiring

Must Be Done By Qualified Person(s) In

Accordance With All Applicable Codes

& Standards. Including Fire-Rated

Construction. “WARNING” To Reduce

The Risk Of Fire, Use Only Metal Duct

Work.

B. Sufficient air is needed for proper

combustion and exhausting of gases

through the flue (chimney) of fuel

burning equipment to prevent

backdrafting. Follow the heating

equipment manufactures guideline and

safety standard such as those published

by the National Fire Protection

Association (NFPA) and the American

Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE),

and the local code authorities.

C. When cutting or drilling into wall or

ceiling, do not damage electrical wiring

and other hidden utilities.

D. Ducted fans must always be vented to the

outdoors.

E. Before Servicing or Cleaning Unit,

Switch Power off At Service Panel And

Lock Service Disconnecting Means to

Prevent Power From Being Switched On

Accidentally. When The Service

Disconnecting Means Cannot be Locked,

securely Fasten A Prominent Warning

Device, Such As A Tag, To The Service

Panel

CAUTION - TO REDUCE THE RISK OF FIRE AND TO PROPERLY EXHAUST AIR, BE SURE TO DUCT AIR

OUTSIDE FOR DUCTED FANS – DO NOT VENT EXHAUST AIR INTO SPACE WITHIN WALLS OR CEILING

OR INTO ATTICS, CRAWL SPACES OR GARAGES.

Read this instruction completely before starting installation. Planning the complete installation before starting any work is

highly recommended. This includes all aspects of the installation including hood location, ducting, electrical requirements, and

adequacy of mounting surfaces.

TABLE - 1

Model LOHI = Internal ventilator

Model LOHE = Remote ventilator

This hood series has been designed to be used with the ventilators shown in Table – 1. Before

cutting into cabinets, it is necessary to confirm that the correct ventilator is being used. Your

dealer should have reviewed your needs prior to your purchase. Be sure you have the correct

ventilation system.

CAUTION: To Reduce The Risk Of Fire And Electrical Shock, Install This

Rangehood Only With Blowers Manufactured By Lynx Professional Grills.

DUCTING: Use a minimum 10" round duct for LOHI and LOHE installations. See Page – 3. A standard starting transition

(33895) is included with the Hood.

SAFTY WARNING:

Turn off power circuit at the service entrance and lockout panel before wiring the range hood.

NOTE: Unit must be vented

to the outside of the building.

1 2 3 4 5 6 ... 14 15

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Page 1 of 8 P/N 11857.00 Rev A INSTALLATION INSTRUCTIONS HOOD MODELS – LOH36, LOH48 & LOH60 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ENTIRE IN

Seite 2 - Fig - B

Page 2 of 4

Seite 3 - All Hoods

Page 3 of 4

Seite 4

Page 4 of 4

Seite 5

Page 1 of 1

Seite 6 - BAFFLE FILTER KIT

P/N INSTALLATION INSTRUCTIONS GRAVITY DAMPER AND COLLAR WITH BIRD SCREEN PART # LOHC INSTALLER: Please leave these Installation Instructions with u

Seite 7

CAUTION: Read this instruction and your hood installation instruction before starting installation. Plan the complete installation before starting a

Seite 8

Page 2 of 8 P/N 11857.00 Rev A BEFORE STARTING INSTALLATION, YOU MUST IDENTIFY THE VENTILATOR MODEL BEING USED AND IF A TOP OR REAR EXHAUST IS TO BE

Seite 9 - Model: LOHE

Page 3 of 8 P/N 11857.00 Rev A Hood Width4"60"48"Wiring Access5"20-3/814-3/810-3/8Dim "A""A"CL Top Of Hood3/4

Seite 10 - ATTENTION INSTALLER

Page 4 of 8 P/N 11857.00 Rev A Outside Patio or Lanai Installation Construction methods and installation shall comply with all local building codes

Seite 11

Page 5 of 8 P/N 11857.00 Rev A The installation instruction that accompanies the hood shall be followed to ensure all safety Instructions and guide

Seite 12

Page 6 of 8 P/N 11857.00 Rev A NOTE: 4-1/4” Tall Starting Transition is Included with the Hood. Transition dimensions may very. Before assemblin

Seite 13 - INSTALLATION INSTRUCTION

Page 7 of 8 P/N 11857.00 Rev A 18 B # 218 BL # 3SWITCHROTARY3-SPD18 W # 5BLEFTSWITCHLIGHT18 W # 9ALIGHT451218 W # 5A18 B # 7A12 B # 118 B # 66318 R

Seite 14 - INSTALLER:

Page 8 of 8 P/N 11857.00 Rev A Lynx Professional Grills 6023 E. Bandini Blvd. Commerce, CA

Seite 15 - HOOD EXTENSION KITS

Page 1 of 4

Weitere Dokumente für Dunstabzugshauben Lynx LOH36

Um das Dokument anzuzeigen Lynx LOH36 Handbuch

Lynx LOH36 Handbuch (19 Seiten)

Um das Dokument anzuzeigen Lynx LOH36 Bedienungshandbuch

Lynx LOH36 Bedienungshandbuch (15 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Lynx LOH36 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Dunstabzugshauben Lynx LOH36 herunter. Lynx LOH36 Vent Hood Installation Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Dunstabzugshauben Lynx LOH36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dunstabzugshauben Lynx LOH36