Lynx L15ICE Handbuch PDF herunterladen (Seite 18)

Important Safety Instructions

24) Spread out the tabs on both sides of the water

tank to unlock it, then pull it out toward you.

Drain the tank.

25) After draining, slide in the water tank along

the rails at the bottom of the right and left

brackets until it clicks into place.

26) Ret the suction tube onto the water tank inlet

by pushing the joint to lock it securely in the

direction of the arrows. A loose tting may

cause a water leak.

27) Repeat 20) through 26) one time.

28) Open the water supply line shut-o valve.

29) Move the control switch to the "WASH" position to circulate clean water for about 5 minutes.

30) Move the control switch to the "OFF" position, then remove the water tank, drain it, and

replace it as described in 23) through 26).

31) Repeat 29) and 30) two more times to rinse thoroughly.

32) Move the control switch to the "ICE" position, and start the automatic icemaking process.

Unlock Unlock

Lock Lock

Bracket

Rail Rail

B. Maintenance

This icemaker must be maintained individually, referring to the instruction manual and

labels provided with the icemaker.

IMPORTANT

1) Exterior

To keep the exterior clean, wipe occasionally with a clean and soft cloth. Use a damp

cloth containing a neutral cleaner to wipe o all oil or dirt build-up.

2) Condenser

Check the condenser once a year, and clean the coil if required by using a brush or

vacuum cleaner. More frequent cleaning may be required depending on the location of

the icemaker.

1 2 ... 13 14 15 16 17 18 19 20

Keine Kommentare

Lynx L15ICE Handbuch Seite 18